Home · CrispAuto · Vehicle Decals

CrispAuto · Technique 01

Vehicle Decals.

Cut and printed vinyl that looks painted on. Door logos, side panels, full-color graphics — applied flat to your vehicle surface with no edge gap and no peeling. The most cost-effective way to brand a service vehicle, and the one customers expect when they see a professional truck on the road.

  • Starts at: $85 minimum
  • Best for: Contractors, service vehicles, small business fleets
  • Warranty: 5-year outdoor (3M Ij180Cv3)
Full-color vehicle decals applied to the door panel of a service truck, showing crisp graphics and clean edges.

Watch · Vehicle Decals

Print, laminate, contour-cut, install.

A narrated walkthrough of how we produce cast-vinyl vehicle decals — eco-solvent print, UV-clear laminate, contour cut on the plotter, transfer-taped, and squeegeed onto a door panel without bubbles or edge lift.

  • 3M IJ180Cv3 cast vinyl, eco-solvent CMYK + Pantone
  • UV-clear overlaminate, kiss-cut or contour-cut
  • Bubble-free install with high-tack transfer tape

How it's built

Cast vinyl, eco-solvent print, UV laminate.

A vehicle decal is a multi-layer stack: cast vinyl film printed with eco-solvent ink, sealed under a UV-clear laminate, then cut to shape and applied with transfer tape. The cast vinyl conforms to mild vehicle curves and door edges without lifting — unlike cheaper calendered film, which shrinks back at the edges over time.

01 · Vinyl film

3M Ij180Cv3 cast

Conformable cast vinyl. Stays put on door edges and slight curves without lifting or silvering.

02 · Print

Eco-solvent Cmyk + spot

High-resolution print with outdoor-grade inks. Pantone-matched for brand-accurate color on fleet jobs.

03 · Laminate

3M 8520 matte or 8519 gloss

UV-clear overlaminate protects ink from fuel splash, car-wash chemicals, and stone chips.

04 · Cut method

Kiss-cut or contour-cut

Kiss-cut for shapes with a bleed, contour-cut for logos that follow the artwork edge exactly.

Colors & finishes

Two paths: cut vinyl or full-color print.

Cut vinyl is single-color-per-layer, great for simple logos and text. Digital print handles photos, gradients, and brand artwork with full CMYK accuracy. Most decal jobs use a combination.

Cut vinyl — 50+ Avery 950 stock colors

Single-color per layer. Stack layers for multi-color logos. Most popular standards below.

Gloss Black Gloss White Signal Red Royal Blue Chrome Yellow Dark Green 50+ colors

Digital print finishes

Full-color CMYK with laminate finish. Matte gives a factory-painted look; gloss pops in direct sun.

  • Matte laminate (3M 8520) — subtle, professional, reduces glare and reflection
  • Gloss laminate (3M 8519) — vivid, high-contrast, maximum visual impact
  • Satin laminate (3M 1380M) — the middle ground, used on most fleet jobs
  • Pantone match — specify any Pantone solid C/U for brand-accurate color

Sizes & pricing

Priced per square foot of print area.

Price is driven by print method (cut vs. digital), finished size, and quantity. Door logos are the most common order; side-panel graphics are the best value per square foot.

SpecStandardNotes
Width range4″ to 48″ per pieceLarger panels seamed, or go to a full wrap for continuous coverage.
Typical door logo18″ × 18″Fits most pickup and van doors. Most popular starting size.
Typical side panel24″ × 36″Covers the rear quarter panel or cargo-door face.
Cut vinyl rate$4 / sqftSingle color per layer. Multi-layer pricing by quote.
Digital print rate$7 / sqftFull-color CMYK. Includes laminate.
Minimum order$85Typical pair of door logos runs $145–$285 installed.

Application

Three ways to get it on the vehicle.

All decals ship flat with transfer tape pre-applied. You pick how they go on — DIY with our tools, drop-in at our shop, or we come to you.

Diy install

We ship with a squeegee, isopropyl prep wipes, and step-by-step instructions. Works well for pieces under 24″. Most customers nail it first try.

Drop-in install

Drive to our Murrells Inlet shop. We apply while you wait — typically 30–45 minutes for a door set. $45 per door panel.

Mobile install

We come to your location. $85 trip charge + per-piece rate. Best for fleets or vehicles that can't leave the job site.

When to pick this

Best for

  • Small business owners and solo contractors on a budget
  • Service vehicles that need logos, phone numbers, and website
  • Owned vehicles you plan to keep for 3+ years
  • Anyone who wants a professional look without the wrap price

Skip this for

Ready to design yours?

Pick your vehicle, upload your logo, see it on the door in seconds.

0 in cart · review